Rev up the rebellion
You’ll feel like a boss when you hop on Valen Rev. Inspired largely by the popular mini bikes of the 60s and 70s, this moto-style e-bike was built with vintage charm, modern e-power, and a renegade attitude. Equipped with the farthest range of our e-bike fleet, Valen Rev will get you where you need to go in style.
Get to know your ride
20mph
Top speed
Up to 55 Miles of Range
Highest-range Rev e-bike
6 Pedal Assist Levels
Propel while pedaling
750W
Brushless rear hub motor
48V
Li-ion battery
4” Fat Tires
Conquer any terrain
Features
Best for all terrain
- Specifications
- Sizing
- Financing
- Owner's Manual
Specifications
Specification
Frameset
- Sizes 1 size 20"
- Material Alloy, 6061 TIG welded, hydroformed tubing
- Fork Steel triple-clamp style (w/integrated handlebar), 28.6mm steerer
Wheelset
- Rims Alloy 20" x 4.0 Fat, 36H x 13G, single-wall
- Hubs F: Alloy bolt-on, R: Hub motor bolt-on, 36H x 13G
- Spokes 13G w/brass nipples, black ED finish
- Tires 20 x 4.0, S/V
E-Power System
- 48V/750W Motor Brushless rear hub motor, 9-pin connector, MXUS
- 48V/750W Battery Li-ion + Charger w/US plug, w/power level display.
- Drive Mode, Display PAS/twist throttle Right side twist throttle, speed sensor, LCD display panel w/6 assistance levels, w/Start-Aid 6kph (~4mph).
- Controller Yelchm Technology
- 48V/750W range Up to 55 miles
Drivetrain
- Rear Derailleur Shimano Tourney 7S
- Shifter Shimano Tourney Thumb Shifter (push/pull) 7S
- Crankset Alloy 3-piece 170mm x 42T, alum arms, steel chainring
- Chain KMC Z-series 1/2 x 3/32"
- BB Crmo spindle sealed cartridge, 100 x 170mm
- Freewheel/Cog Shimano 7-speed 14-28 (14-16-18-20-22-24-28)
Components
- Headset Threaded, steel, 1 1/8" (28.6mm)
- Brakes JAX Mechanical disc Front & Rear, 160mm
- Handlebars 650mmW, Integrated w/fork
- Grips Moto w/right side twist throttle
- Stem Integrated w/fork
- Saddle Moto-style SuperSoft Dims: Length: 570mm, Width: 110mm/front - 180mm/rear, Height: 70mm/front - 100mm/Rear
- Pedals Alloy Platform
Extras
- Kickstand Alloy chainstay mount
- Light(s) Front + Rear powered by Valen lithium-ion battery charging system
- Fenders Steel w/steel stays
- Chaincover Chainring cover
- Bottle Cage Alum alloy
- Tools 4 pcs: 15mm open/box, 10mm open/box, 5/6mm hex key, cross (Phillips) screwdriver
- Item Weight 72 lbs (battery included)
- Recommended Weight Limit 250lbs
- Rider Limit Single Passenger
- Compatible With Retrospec Rover Trailers
Sizing
Sizing
How to measure my inseam for a bike
Your inseam can help you find the perfect sized bike (measuring it properly is similar to pant inseams but measured a little differently). Here's how they work:
- Stand upright with your feet 6-8" apart.
- Using a tape measure or tailor tape, measure from the bottom of your foot to the top of the inside of your leg.
- Compare your inseam measurement to the standover height of the bike. You should have about an inch of space between your body and the top tube.
Size | Height Range | Standover Height |
20" | 5'-6'4"+ | 30" |
Financing
Buy Now, Pay Later
Owner's Manual
Assembly Instructions
Assembly Instructions
Download NowElectric Bicycle Owner’s Manual
Download NowManuel du propriétaire du vélo électrique
Download Now